• This email address is being protected from spambots. You need JavaScript enabled to view it.
  • +38 (067633-58-55

  • Hot dip galvanized coils

    Thickness, mm Width, mm Standard Steel grade Coil weight, ton Characteristics 
        ASTM A 653M CQ, LFQ, DQ, SQ33, CS-A, CS-B, CS-C, SS230, SS255, SS270, SS340 up to 10,0 Zinc coating - Z120-350. Сrystallization  - normal and minimum. Surface protection - passivated, oiled, passivated and oiled.
    JIS G 3302-94 SGCC, SGC340 Zinc coating - Z12-35.         Сrystallization - normal (R) and reduced spangles (Z), training surface (S). Surface protection - passivated (C), oiled (O), passivated and oiled (CO)
    DIN 17162-77, p.1 St01Z, Zinc coating - Z120-350. Crystallization - normal (N) and the minimum (M). Surface protection - passivated (C), oiled (O), passivated and oiled (CO). The quality of the surface - in a state of coating (A), improved (V), the highest quality (C).
    St02Z,
    St03Z,
    0,25-0,5 900-1000 St04Z
    0,47-2,0 900-1300 DIN 17162-80, p.2 StE250-2Z
        EN 10142, FeP02G, FeP03G, DX51D, DX52D, DX53D
    EN 10326
    EN 10147, S220GD, S250GD, S280GD, S320GD, S350GD
    EN 10327
    GOST14918-80 08kp, 08ps, 08U, st1-3 kp,ps,sp Appointment - general purpose (ON), under painting (PK, for cold forming (CP), for cold stamping (HS). Coating Class  - P.1, 2. Crystallization -  pattern (KR) without a pattern (MT).
    STAO 38428679-05-2007 08kp, 08ps, 08U
    0,45-1,5 500-1450 GOST14918, GOST19904 st1-3 kp,ps,sp 2,5-11,5 Galvanized coils for various purposes
    0,45-1,5 500-1450 08kp, 08ps, 08U

  • Hot dip galvanized coils GHR

    Thickness, mm Width, mm Standard Steel grade Coil weight, ton Characteristics
    0.25-3.00 800-1530 DIN EN 10346 DX51D+Z, DX52D+Z, DX53D+Z, (*)DX54D+Z, DX56D+Z, DX57D+Z 5,0-35,0 Zinc coating (Z60-Z600), a minimum spangle (M), surface quality: A, B (improved by training the surface)
    S220GD, S250GD, S280GD, S320GD, S350GD Surface protection: passivation (C), oiling (O), passivation and oiling (CO)
    HX160YD, HX180YD, HX220YD, HX260YD, HX300YD  (*)(Zinc Coated IF Steels) Zinc coating (Z60-Z600), a minimum spangle (M), surface quality: A, B (improved by training the surface)
    HX160BD, HX180BD, HX260BD, HX260BD, HX300BD (*)(Zinc Coated Bake Hardenable Steels)
    HX260LAD, HX300LAD, HX340LAD, HX380LAD, HX460LAD, HX500LAD (*)(Zinc Coated HSLA Steels) Surface protection: passivation (C), oiling (O), passivation and oiling (CO)

  • Cold galvanized coils GCRP

    Thickness, mm Width, mm Standard Steel grade Coil weight, ton Characteristics
    0.25-3.00 800-1530 DIN EN 10346 DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z, DX57D+Z 5,0-35,0 Zinc coating (Z60-Z600), a minimum spangle (M), surface quality: A, B (improved by training the surface)
    S220GD, S250GD, S280GD, S320GD, S350GD Surface protection: passivation (C), oiling (O), passivation and oiling (CO)
    (Zinc Coated IF Steels)
    HX160BD, HX180BD, HX220BD, HX260BD, X300BD (Zinc Coated Bake Hardenable Steels)
    HX260LAD, HX300LAD, HX340LAD, HX380LAD, HX460LAD, HX500LAD (Zinc Coated HSLA Steels)

  • Coated steel coils

    Thickness, mm Width, mm Standard Steel grade Coil weight, ton Characteristics
    0,3-0,7 900-1250 GOST 30246-94, 30246-94 up to 7,0 For the manufacture of products by cold stamping and roll forming  for the needs of construction, industry and manufacturing appliances.
    EN DX51D,DX52D,DX53D,S220,S250,S280,S320,S350
    JIS SGCC,SGCD1,SGCD2,SGC 340,SGC 400,SGC 490
    ASTM CS,FS,SQ 230,SQ 255,SQ 275,SQ 340

  • Coating color is chosen based on the type of swatch colors RAL Classic and RAL Design

    By type of coating:

    -          one side -          two sides -          monolayer -          multilayer

    By  material of coating:

    -          lacquer painting -          plastisol

    Cover parameters  Cover properties
    Polyester Polyurethane
    Cover thickness 25 mkm 25 mkm
    polish 30-50% 30-50%
    Hardness ≥ F 2H
    Minimum bend 1,5 T 2,0 T
    Adhesion 0 scores 0 scores
    Salt spray 500 hours 750 hours
    Moisture 500 hours 750 hours
    eolation 1500 hours 1750 hours

  • Coated steel coils

    Thickness, mm Width, mm type of coating Coil weight, ton
    0,25–1,20 800–1550 polyester, polyvinyl, polyurethane, plastisol or other 5,0-32,0
    The thickness of paint top surface Standard: The total thickness of the coating of the upper surface technical specification ±  %10
    20 ± 2mkm, 25 ± 3 mkm
    Metallic color: The total thickness of the top coating surface using metallic colors 23± 3 mkm
    18 ± 2mkm,
    The thickness of the primer layer and the back surface of the top 4 – 6 mkm ( 5 ± 1mkm ) 4 – 6 mm (5 ± 1 mm )
    The thickness of the back surface coating 7 ± 1mkm

Русский

Oформить заявку